cecotec CONGA CONNECTED GYRO Manual De Instrucciones página 58

ENGLISH
The robot vacuum
cleaner does not
return to the charging
base.
The main brush does
not spin.
The robot vacuum
cleaner movements or
route are unusual.
7. TECHNICAL SPECIFICATIONS
Conga Connected Gyro
Product reference: 08605
Voltage: 100-240 V AC 50/60 Hz
Battery: 14.4 V DC Li-ion 2600 mAh
Frequency bands: 2.4 GHz
Maximum Transmission Power: 17.5 dBm
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
8. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations, the
appliance and/or batteries must be disposed of separately from household
waste. When this product reaches the end of its shelf life, you should dispose
of the batteries/accumulators and take them to a collection point designated
by the local authorities.
Consumers must contact their local authorities or retailer for information
concerning the correct disposal of old electrical and electronic appliances
and/or their batteries.
Compliance with the above guidelines will help protecting the environment.
58
Remove the objects 1 metre on the left and right, and 2 metres in
front of the charging base.
The robot vacuum cleaner will return to the charging base faster
when it is near it. When it is far, it will take more time to identify it.
Clean the charging terminals.
Clean the main brush.
Check if the main brush is installed correctly.
Carefully clean the sensors with a clean, dry cloth.
Restart the robot vacuum cleaner. To do this, switch the robot off
and on or do a RESET.