Publicidad
Idiomas disponibles
Idiomas disponibles
RECORDING A WHOLE CD
Disc
drive
CD>MD
m
LIJ
9
DISPLAY
1 Load a recordable MD into the disc drive with the
label side up and in the direction of the arrow.
Direction
guide
2 Press the CD button on the control panel.
3 Load the CD to be recorded.
4 Press the CD ~ MD
button
to start recording.
Recording
stops automatically
when the music on the CD ends.
When recording
stops, "TOC Edit" appears
on the display
and
the contents
(TOC) of the recording
are recorded
on the MD.
To stop recording before the end of the CD
Press the W button.
Recording
stops, and the contents
(TOC)
of the recording
are recorded
on the MD,
To stop play of the CD, press the N button again,
To record on a previously
recorded MD
If there is an unrecorded
section left on the MD, the new recording
automatically
starts from where the previous
recording
finished.
If you want to start recording
from the beginning
of a previously
recorded
MD, erase the previous
recording
completely.
(See
page 26,)
To change the display during recording
Press the DISPLAY
button.
With each press of the button, the
display changes
in the following
order.
[
(0
Track number and elapsed
time of CD
(Example:
CD lTr
2:34)
~
Remaining
playback
time of CD
(Example:
CD
-32:37)
3 .. .
Track number and elapsed
time of MD
(Example:
MD 4Tr
5:12)
@
Remaining
recordable
time of MD
(Example:
MD
–62:37)
RECORDING
FROM A DESIRED TRACK
To start recording
from a desired
track, select the track using
the
< and ~-
buttons before pressing the CD b
MD button
to start recording,
m
You can close the control panel during recording
ENGLISH
17
Publicidad
