simatherm IH 045 Manual De Instrucciones página 35

4.2 Function of buttons
Button Function
POWER Press to adjust the power in steps of 20%. The selected power is
indicated on the power display.
Hold POWER for The LEDs of the power indicator flash when set power is halved.
longer than 5s To cancel the power reduction, press the POWER button again
and hold for 5 seconds.
MODE Press to switch between TIME MODE and TEMP MODE.
UP (+) Press to increase the value shown on the main display.
DOWN (-) Press to decrease the value shown on the main display.
START/STOP Press to start or stop the heater. The LED on the START/STOP
button is lit when the heater is heating and flashes during tempe-
rature measurement.
Hold START for Disconnect Bluetooth (safety function)
longer than 10s
© simatec ag Induction Heater IH 045 35