Publicidad
Idiomas disponibles
Idiomas disponibles
Adjustments menu
m
=
Q)
r
ep)
I
O
Contrast : Adjust the screen contrast to match the brightness level in the room.
Pressing the [2] key toggles between brightness and contrast.
Direct operation
Even if the menu screen does not appear, the contrast can be adjusted by pressing
the 4 or È key. If the [4 and B keys are pressed at the same time, the
f
maximum level (100) will be set.
Xt
Brightness
. Adjust the brightness to match the brightness level in the room so that the level
will be easy to see.
Pressing the [2] key toggles between contrast and brightness.
Note: If the [4 and >) keys are pressed at the same time on the Brightness
adjustment screen, the standard level (50) will be set.
Size € Pos. : Press the [2] key to select the zoom / horizontal position / horizontal size / vertical
position / vertical size adjustments.
y-
Press the (1} key to save the adjustment.
ZOOM : Both the horizontal and vertical size of the image can be adjusted at the same
time; however, the aspect ratio cannot be changed.
Press the &@ key to make the image smaller, the B®) key to make it larger.
H. Position
: The horizontal position of the image can be adjusted.
Press the [4 key to move it to the left, the D] key to move it to the right.
[=]
H. Size : The horizontal size of the image can be adjusted.
Press the [dí key to make the image smaller, the P key to make it larger.
Note: Setting the image in the center of the screen to start will make the
ene
adjustment easier.
E
V. Position
: The vertical position of the image can be adjusted.
Press the [4 key to make it downward, the B key to move it upward.
[1]
V. Size : The vertical size of the image can be adjusted.
Press the [dl key to make the image smaller, the P key to make it larger.
Note: Setting the image in the center of the screen to start will make the
adjustment easier.
Jd
Geometry : Press the [2] key to select the vertical pincushion / side pincushion balance /
trapezoid / parallelogram / Geometry 2 adjustments.
Press the [1] key to save the adjustment.
LT
V. Pincushion
: the image can be corrected for barrel distortion.
Press the
key to decrease the Pin / Barrel distortion of the image,
|
|
the B key to increase it.
CT
Side Pin. Bal. : ris possible to adjust the side pincushion balance to the left and right.
Press the [d key to expand to the left of the image, the È] key to
|
expand it to the right.
LN
Trapezoid
. The image can be corrected for trapezoidal distortion.
Press the [$ key to make the top edge narrower, the à] key to make the
bottom edge narrower.
LF
Parallelogram
. The image can be corrected for parallelogram distortion.
Press the [4 key to collapse the parallelogram to the left, the > key
to collapse it to the right.
> > Geometry 2 : Press the Bl key to change the sub OSD screen.
Press the [2] key to select the Top Corner / Bottom Corner / S-Curve 1 /
S-Curve 2 adjustments.
LJ
Top Corner : The image can be corrected for vertical pincushion distortion in the
top corner.
EE.
Bottom
Corner : The image can be corrected for vertical pincushion distortion in
the bottom corner.
S1
S-Curve 1 : The image can be corrected for vertical pincushion distortion in the S-
Curve 1.
O
0]
S2
S-Curve 2 : The image can be corrected for vertical pincushion distortion in the S-
Curve 2.
=
"aks O
10
Publicidad
