Publicidad
Idiomas disponibles
Idiomas disponibles
Pin Assignment
Follow the instructions below to connect the P110i to a computer.
A. Signal connector: 15 pin mini D-Sub (PS / 2 or PC / AT compatible model)
Connect the signal cable to the 15 pin mini D-Sub connector on the display unit.
B. Signal connector: 15 pin D-Sub (Apple computer)
Convert a MAC 15 pin D-Sub connector to a 15 pin mini D-Sub connector using a Panasonic MAC
adapter, and connect it to the 15 pin mini D-Sub connector on the display unit.
< REAR PANEL >
Pin assignments of 15 pin mini D-Sub connector
m
zZ
Q)
m
ep)
Ir
E
a
ATM
E
a
ar
|
DE A
OTAN TACA
ee
ELITE
eme 1
SDA* (Bi-directional Data
SCL" (Data Clock)
|
*: "VESA"s Display Data Channel (DDC) Standard
C. Signal connector: BNC connector
Sync on green system
Connect the signal cable to RED, GREEN (sync
ongreen) and BLUE BNC connectors.
Composite sync system
Connect the signal cable to RED, GREEN, BLUE
and H-SYNC (H / V composite) BNC connectors.
-
Separate sync system
A
Connect the signal cable to RED, GREEN, BLUE
©
© ©
and H-SYNC and V-SYNC BNC connectors.
ma
(O
a
Note : If your computer's video output is over
110 MHZ, it is recommended that it be
used with the BNC connectors.
External View
Dimensions
Width
:
498 mm (19.6")
Height
:
477.5 mm (18.8")
Depth
:
494.5 mm (19.5")
Base diameter
: $ 300 mm (4 11.8")
TE
Height without stand:
432.5 mm (17.0")
AR
Pan / Tilt range
Up
: 13 degrees
Down
:
3 degrees
Left, right
: 90 degrees each
Publicidad
