Descargar Imprimir esta página

Panasonic PanaSync/Pro P110i Manual De Instrucciones página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

Specifications
21" CRT (20.0" / 50.8 cm Viewable Image Size) Flat Square
Dot-pitch
0.25 mm (Horizontal : 0.217mm / Vertical : 0.132mm)
Phosphor / Glass
RGB medium short persistence (Hi-EU RED), Crystal Pigment / Dark tint
Surface treatment
B-AGRAS (Anti-Glare, anti-Reflective and Anti-Static) Coat
Input signals
Video signaling
RGB analog
Signal level
0.7 Vp-p (without sync. signal), 1.0 Vp-p (with sync. signal)
Sync. signal
H / V separation (TTL level), H / V composition (TTL level),
Sync.-on-green
Frequency Range
Horizontal Frequency : 30.0 kHz to 117.0 kHz*
Vertical Frequency : 50.0 Hz to 180.0 Hz
Preset mode
1 preset and 7 reservation (See page 15)
Video
Maximum Pixel Ctock | 250.0 MHz (typ.)
(600 dots (H) x 1,200 lines (V) at 92 Hz, 1,800 dots (H) x 1,440 lines (V) at 70 Hz"
m
=
e)
m
on
=
Viewable Image Size
Factory preset
15.59" x 11.69", 19.5" Diagonal **
(H x V, Diagonal)
Full scan (Typical)
15.98" x 11.97", 20.0" Diagonal! **
Display Color
Analog input, unlimited number of colors ***
Connectors
Video Signal
15 pin mini D-Sub connector (female pins), BNC x 5
Power supply
148 W typ. / < 10 W stand-by, < 3 W sleep mode (See page 14)
Controls
On screen display
Contrast, Brightness, Size & Pos. (Zoom, H. Position, H. Size,
V. Position, V. Size), Geometry (V. Pincushion, Side Pin. Bal.,
Trapezoid, Parallelogram, Top Comer, Bottom Corner, S-Curve 1,
S-Curve 2 ), Rotation (Tilt), Color Temp. (9300K + 8 MPCD, 7500
K, 6500 K, 5000 K, 9300 K + 27 MPCD, User), Recall, Video Level
(0.7 V / 1 V), H. Moire, V. Moire, H.Convergence, V.Convergence,
Linearity-C, Linearity-E, Language, OSD Position, Degauss, Signal,
Self-Test menu
Tilt / swivel
13° up, 3° down, 90° each to right and left
Dimensions (W x H x D)
19.6" x 18.8" x 19.5"
(498 mm x 477.5 mm x 494.5 mm)
Weight {monitor only)
27.0 kg (59.5 Ibs)
Approvals
UL1950, CSA 22.2 No.950, TÜV / GS, CE / CISPR 22-B (EN55022),
NORDIC, FCC Class B, DHHS, HC, IC-B, VCCI Class B,
MPR Il, TCO'92, Enerncy Star®, ISO 9241-3 (Ergonomics) / -8 (Colors)
Standard
1 detachable signal cable for VGA, SVGA
1 detachable AC power supply cord
Tilt & Swivel base attached
Operating Instructions, Warranty card
Environmental conditions
Operating | Temperature
5 to 35 "C(41 to 95 °F)
Humidity
5 to 90% (no condensation)
Altitude
10,000 ft
Storage
Temperature
—20 to +60 'C (4 to 140 °F)
Humidity
5 to 90% (no condensation)
Altitude
40,000 ft
Windows® 95/98
Plug & Play
VESA? DDC™ 1 / 2B meets Windows® 95 / 98 Plug & Play
Requirements
Note:
* The on-screen image may flicker if the display is operated with the Vertical freq. under 60 Hz.
* FCC Class B Complied : Up to Mode 1,600 x 1,200 at 115 kHz max. and 1,800 x 1,440 at 105 kHz max. Horizontal
frequency.
** Depends on signal timing used, see page 15.
*** Number of colors depends on the Video Board used, memory installed, and RAMDAC (Random Access Memory
Digital to Analog Converter).
Specifications and design are subject to change without notice.
This product may be subject to export control regulations.
Weight and dimensions shown are approximate.

Publicidad

loading

Este manual también es adecuado para:

Tx-d1f64