Philips Lumea BRI945 Manual Del Usuario página 10

10
English
-
Hair removal by intense pulsed light sources can cause increased hair growth
in some individuals. Based upon currently available data, the highest risk
groups for this response are females of Mediterranean, Middle Eastern, and
South Asian heritage treated on the face and neck.
-
If you experience skin irritation or skin redness after treatment, wait until it
disappears before applying any product to your skin. If you experience skin
irritation after applying a product to your skin, wash it off with water. If you
still get skin reactions, stop using the device and consult your doctor.
-
If shaving, epilating or waxing causes skin irritation, we advise you not to use
the device until skin irritation has disappeared.
-
This device is not intended for use by persons with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the device by a
person responsible for their safety.
-
Children should be supervised to ensure that they do not play with the
device. Supervision is required to avoid potential risks such as exposure to
the light output, electrocution, strangulation from the cables or choking on
the attachments.
-
Tanning with natural or artificial sunlight might influence the sensitivity and
color of your skin. Perform a skin test to determine the appropriate light
intensity setting.
-
After each treatment, wait at least 48 hours before tanning to ensure any
skin reaction has been resolved.
-
If you notice a skin tone change since the last treatment, we advise you to
perform a skin test and to wait 24 hours before your next treatment.
-
Always check the device before you use it. Make sure that the SmartSkin
sensor window is clean when using the device, to avoid improper operation
(see 'D Clean & store after treatment').
-
The adapter, light exit window and the filter of the attachments can become
very hot (>210 °C/>410 °F) during usage. Always let the adapter, the light
exit window as well as the filter and inner parts of the attachments cool
down before you touch them.
-
This device has a detachable power supply unit. Only use the adapter
provided with this device. Do not use an extension cord. The reference
number (AD2069x20020HF) can be found on your device. The 'x' in this
number refers to the plug type for your country.
-
Follow the recommended treatment schedule. Increasing the frequency,
especially in the initial phase, can increase the risk of skin reactions.