Descargar Imprimir esta página

Bosch GRG18V-3600C Instrucciones De Funcionamiento Y Seguridad página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

Problem
Toolbox
App
Display
Warning
Message
Error
message
Working Advice
The power tool with built-in Bluetooth® Low
Energy Module is equipped with a radio in-
terface. Local operating restrictions, e.g. in
aircraft or hospitals, must be observed.
In areas in which the Bluetooth® wireless
technology must not be used, the Bluetooth®
Low Energy Module must be switched off via
the app.
LED Worklight
The LED Worklight 13 improves visibility in
the immediate work area. It is automatically
switched on when the On/Off Switch 12 is
pressed.
160992A8AK GRG18V-3600C 20230616.indd 15
160992A8AK GRG18V-3600C 20230616.indd 15
Operation
Display
Cause
Color
Yellow
Jaws 17 worn
Yellow
Rechargeable battery 9
state of charge weak
Yellow
Rechargeable battery 9
almost overheated
Yellow
Electronics almost over
almost overheated
Yellow
Jaws 17 not in working/
neutral position
Red
Rechargeable battery 9
state of charge critical
Red
Rechargeable battery 9
overheated
Red
Electronics overheated
Red
Jaws 17 jammed
-15-
Corrective Measure
Check and, if required, replace the Jaws 17
Replace or charge the rechargeable battery 9
Replace or charge the battery 9
Switch off the power tool and allow it to
cool down for 3–5 minutes until the status
indicator 11c lights up green
Switch off the power tool and allow it to cool
down until the status indicator 16 lights up
green
Press the on/off switch 12 so that the Jaws 17
return to the working/neutral position
Replace or charge the rechargeable battery 9
immediately
Replace the rechargeable battery 9
immediately
Switch off the power tool immediately and
allow it to cool down for 3–5 minutes until the
status indicator 11c lights up green
Switch off the power tool immediately
and allow it to cool down until the status
indicator 11c lights up green
Clean the Jaws 17 and, if required, replace
them
Suspension Device
You can use the Hanging Ring 3 to attach the
power tool to a suspension device (e.g. on a
production line).
To do so, fold the Hanging Ring 3 upwards.
Regularly check the condition of the hanging
ring and the catch in the suspension device.
Belt clip
You can use the Belt Clip 7 to conveniently
secure the power tool to your belt.
or
or
6/16/2023 7:50:14 PM
6/16/2023 7:50:14 PM

Publicidad

loading

Este manual también es adecuado para:

Grg18v-3600cn