Publicidad
Idiomas disponibles
Idiomas disponibles
Connectivity functions
System Requirements for Using the
App
System Requirements
Mobile device
(tablet,
smartphone)
Installing and Setting up the App
You will need to install the device-specific
app before you can use the connectivity
functions.
• Download the app from the correspond-
ing app store (Apple App Store, Google
Play Store).
Note: You will need to have a user ac-
count with the relevant app store to do
this.
App
iOS
name
Bosch
Toolbox
• Then select the MyTools or Connectivity
sub-item in the app.
• The display of your mobile device shows
you all of the subsequent steps required
to connect the power tool to the mobile
device.
160992A8AK GRG18V-3600C 20230616.indd 16
160992A8AK GRG18V-3600C 20230616.indd 16
Connectivity
Android 6 (and newer)
iOS 11 (and newer)
Android
Data transfer via Bluetooth®
The built-in Bluetooth® Low Energy Module
sends a signal at regular intervals. Depend-
ing on ambient conditions, multiple trans-
mission intervals may be required before the
power tool is detected. If the power tool is
not detected, check the following:
• Is the distance to the mobile device too
great? Reduce the distance between the
mobile device and the power tool.
• Is the coin cell for the built-in Blue-
tooth® Low Energy Module weak or
drained? Contact an authorised after-
sales service centre for Bosch power
tools to replace the coin cell.
• Switch Bluetooth® off and on again on
your mobile device. Check whether the
power tool has now been detected.
Functions in Conjunction with the
Power Tool
In conjunction with the Bluetooth® Low
Energy module, the following connectivity
functions are available for the power tool:
• Registration and personalisation
• Status check, output of warning and
error messages
• General information and settings (e.g.
reminder interval for checking the jaws)
• Management
-16-
6/16/2023 7:50:14 PM
6/16/2023 7:50:14 PM
Publicidad
