Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning or Replacing the Jaws
(Fig. 8, 9, 10)
1. Remove the Cover Sleeve 2 from the
power tool by turning it anticlockwise.
2. Use the Wrench 8 to provide resistance
on the Joint 16 and loosen the Jaw
Sleeve 15.
Fig. 8
(2)
Fig. 10
(2)
160992A8AK GRG18V-3600C 20230616.indd 17
160992A8AK GRG18V-3600C 20230616.indd 17
Maintenance
3. Remove the Jaw Sleeve 15. This allows
access to the Jaws 17 and Pressure
Spring 18.
4. Clean the Jaws 17 and Pressure Spring
18 to remove dust and metal splinters.
5. If necessary, replace the jaws.
6. Reassemble all components in reverse
order.
Fig. 9
(18)
(17)
(15)
-17-
(16)
(15)
6/16/2023 7:50:16 PM
6/16/2023 7:50:16 PM
Publicidad
