Bresser TemeoTrend SQ Instrucciones De Uso página 20

ALARM SET button (Fig. 1, 2)
Press the button in the display mode to switch
the alarm on/off. Press the button in the alarm
mode to switch the alarm on/off. Press and
hold down the button for about 2 seconds
in the alarm mode to change into the alarm
setting mode. Press the button in the alarm
setting mode to skip to the next input field.
Press and hold down the button for about
2 seconds in the setting mode to save the
settings and exit the setting mode.
CH/+ button (Fig. 1, 3)
Press the button in display mode to choose
channel 1, 2 or 3 of an outdoor sensor.
Press and hold down the button for about 2
seconds to activate the automatic channel-
change indicator. Press the button again to
return to the normal display mode. Press the
button in the setting mode to increase the
value of a flashing field.
MEM/- key (Fig. 1, 4)
Press the button to display the max/min values
for the indoor and outdoor temperature, for
about 5 seconds. Press and hold down the
20
L700X40XMSP1215BRESSER.indd 20
button for about 2 seconds in max/min mode
to clear the max/min values. Press the button
in the setting mode to reduce the value of a
flashing field.
°C/°F switch (Fig. 1, 6)
Move the switch to position °C or °F to switch
between temperature display in °C or °F.
SENSOR button (Fig. 1, 7)
Press the button to perform the channel test
for the weather station and outdoor sensor.
RCC button (Fig. 1, 8)
Press and hold down the button for about 8
seconds, to activate or deactivate the auto
receive operation of the time signal.
RESET button (Fig. 1, 9)
Press the button with a thin metal rod in the
event of a malfunction for resetting the device
settings.
14.12.15 13:2