Publicidad
Idiomas disponibles
Idiomas disponibles
device and let it cool for 2 minute.
USING YOUR WHISK
1. Insert the whisk (10) into its base (11).
2. Assemble the whisk (10) and its base (11) on the motor unit (1) and turn them until they are locked.
3. Plug in the appliance. To avoid splashes, immerse the whisk (10) in the ingredients before turning on the
appliance. Do not immerse the whisk (10) in the ingredients higher than the metal part.
4. Whisk the mix by conducting circular movements.
5. To use the maximum speed, press the turbo button (3).
6. Release the on/off button (2) or the turbo button (13) before removing the whisk from the mixture.
Do not use the device continuously for more than 1 minute in this configuration. After 1 minute of continuous
use, turn off the device and let it cool for 1 minute.
Warning: Never mix hot oil, fats, frozen products, big pieces of meat or ingredients that are too hard.If the
appliance heats up, stop using it for a few minutes to let it cool down. If the device freezes, turn it off and
unplug it before any cleaning operation.
CLEANING AND MAINTENANCE
After use, clean all the accessories with warm soapy water. Rinse and dry them thoroughly. Clean the motor
unit (1) with a dry or slightly damp cloth and then dry. Do not use a stripping product, scourer or abrasive pad.
Disassemble the detachable accessories for easy cleaning.
When the time comes to eliminate this product, please consider the environmental impact and take it to
recognized recycling facility instead of disposing it with general household waste. Take the equipment
to a waste disposal site. Plastic and metal parts that are used in the construction of this appliance can
be separated into pure grade which allow recycling. Ask to your service centre for details. Every one of us can
participate on the environmental protection.
22
Publicidad
