Kenmore 24 Manual Del Propietário página 5

Dimensions and Specifications
(for Built-In Style models)
o!o
0 0
o
Leveling Rollers
The rollers have two purposes:
I. The rollers need to be adjusted so the refiigerator is
firmly positioned on the floor and does not rock
back and forth°
2. The rollers allow you to move the refiigerator away
fiom the walt for cleaning.
To adjust the rollers:
• Remove the base grille
by pulling it out at the
bottom.
Water
314"Airspace
(1t2" Gap + 1t4"
Wall Plates)
24 ° Side Panels
0
Counter
Top
Turn the two front
roller adjusting screws
clockwise to raise
the refrigerator,
counterclockwise to
lower it_ Use a 3180
socket wrench, adjustable
wrench or pliers°
Built-In Style models also
have rear adjustable rollers
so you can align the
refrigerator with your
kitchen cabinets. Use a
5/16" socket wrench to
turn the screws for the
rear rollers--clockwise
to raise the refrigerator,
counter-clockwise to
lower it.
Front Roller
Rear Roller Adjusting Screw
(on Built-In Style models
only). Use this screw if the
refrigerator has one,_
Front Roller
Adjusting
Rear Roller Adjusting Screw
(on Built-In Style models
only). Use this screw if the
refrigerator does not have
the screw pictured above.