Joyello JL-1007 Manual De Instrucciones página 16

GB JL-1007/1008
TO OPEN THE STROLLER
Hold the handles and lift upward until the chassis is fully expands ensuring that it clicks in to the position.
FRONT WHELL ASSEMBLY
Insert the front wheel into the front leg until you hear a click sound. Repeat this process for both swivel
wheels.
To lock the front swivel wheel, align wheels to rear of front leg and push the lock down on each front leg
(A). To unlock push the lock up (B).
16
REMOVE THE FRONT WHEELS
To remove, push tab (A) and pull the wheel off.
REAR WHEEL ASSEMBLY
Adjust the direction of the rear axle; make
sure you have correctly lined up the flat
edge on the axle with the flat edge of the
hole. Then push the rear axle
Into the whole, until you hear a click sound.
Ensure that it is engaged before use.