F38_AC.book Seite 9 Donnerstag, 15. März 2012 5:53 17
F38 AC
NOTE
I
If you are not going to use the refrigerator for a long time, leave the
door slightly ajar to prevent unpleasant odours building up.
➤ Place the refrigerator on a firm base.
Ensure that the ventilation slots are at least 10 cm away from the wall so
that the heat that arises during operation can be drawn off.
➤ Connect the 230 V connection cable to the 230 V AC mains supply.
✓ The refrigerator starts cooling the interior.
➤ Set the thermostat (fig. 1 1, page 3) to the desired temperature
(4 – 12 °C).
➤ If you wish to switch the refrigerator off, pull out the connection cable.
7
Cleaning and maintenance
WARNING!
!
Always disconnect the device from the mains before you clean and
service it.
NOTICE! Risk of damage
A
Never clean the cooler under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp cloth.
8
Troubleshooting
Problem
Your device is not
working (plug is
inserted).
EN
Possible cause
No voltage present in the
AC voltage socket.
The inner fan or the cooling
element is defective.
The integrated mains
adapter is defective.
Cleaning and maintenance
Suggested remedy
Try using another plug socket.
This can only be repaired by an
authorised repair centre.
This can only be repaired by an author-
ised customer services unit.
9