SFA SANICUBIC 2 Manual De Instalación página 17

UK
9
FAULT FINDING GUIDE
IN ALL CASES, YOU MUST DISCONNECT THE PUMPING STATION
Alarm on Sanicubic® 1 device (IP67)
FAULT DETECTED
flashing red alarm LED
faulty
Steady red alarm LED
inflow
LED off
Alarm on the Sanicubic® 1 WP/ Sanicubic® 2 Classic/Sanicubic® 2 Pro/ Sanicubic® 2 XL control box
FAULT DETECTED
Siren + flashing red general
alarm LED faulty
Siren + steady red general
alarm LED
following problem: blocked pipe,
pump(s) blocked
power failure
Siren + general alarm LED +
flashing yellow mains LED
10
DISMANTLING
INSTRUCTIONS RESERVED EXCLUSIVELY FOR QUA-
LIFIED PROFESSIONAL SPECIALISTS
If one of the motors cannot be made to operate
correctly, use of that motor can be "disabled" by
setting the corresponding switch on the board
(SW1: switches 1 and 2 for motors 1 and 2).
The motor thus "disabled" can be removed. The
unit operates on the other motor.
FROM THE POWER SUPPLY
POSSIBLE CAUSES
directions in the vent pipe
POSSIBLE CAUSES
directions in the vent pipe
device (alarm off )
button
11
GUARANTEE
2 years guarantee as from its date of purchase
subject to correct installation and correct use.
ACTION TO BE TAKEN
ACTION TO BE TAKEN
-
7
e