Stamping - Reiner jetStamp 790 Manual De Instrucciones

jetStamp 790 / MP
Setting the date
Press [MODE] until [CLOCK] appears in the menu line.

Press [CLOCK].

Press [NEXT] until "INPUT - DATE 1" appears.

To change the year value, press [VARY].

To increase the year number, press [INC].

To change the month value, press [NEXT].

To increase the month number, press [INC].

To move directly to the next menu item,

press [RETURN] once.
– or –
To save changes and to return to the main menu,

press [RETURN] twice.
The main menu appears.

1.9 Stamping

PLEASE NOTE
The ink in the print head is harmful.
Do not bring the ink into contact with a person's skin or face.

Depending on the setup of the imprint, either one or two lines are printed.
Press the red trigger

Troubleshooting
If "IMPRINT BLOCKED" appears in the display, the print trigger is blocked.
Press [QUIT] to release the print trigger once.

Proceed as described on page 59 to release the print trigger permanently.

48
to initiate the print.
