Technical Data - Reiner jetStamp 790 Manual De Instrucciones

jetStamp 790 / MP

5.2 Technical data

Stamping time
Stamping cycle
Print capacity per ink cartridge
Standby time per battery charge
Operating time per battery charge
Battery charging time
Dimensions, stamp only
Dimensions, charging station
Total height
Weight, stamp
Weight, charging station
Ambient temperature for operation
Temperature for storage and transport
Humidity for operation
Humidity for storage and transport
Power supply
Manufacturer
Mains voltage
Charging station input voltage
Noise level
Approx. 0.7 seconds
> 2 seconds
Approx. 300,000 characters
6 days
Approx. 500 prints
Approx. 6 hours
(W x H x D in mm) 96 x 77 x 170
(W x H x D in mm) 115 x 141 x 35
195 mm
Approx. 446 g (with ink cartridge)
Approx. 370 g
+ 8 °C to + 35 °C (conditionally, down to - 8 °C)
- 20 °C to + 60 °C (up to 48 hours)
30 % to 70 % relative humidity
10 % to 90 % relative humidity
through supplied power supply unit
model SA 115C-12
Ontop European Division of SAC Group
100 - 240 V ~ 50 - 60 Hz / 0,4 A AC
12 V / 1,3 A DC
< 60 dB (A)
(Workplace related emission value
in accordance with ISO 7779)
65