SentrySafe SFW205URC Manual De Propietario página 3

Programming Safe Features
YOUR DIGITAL LOCK
Programming the User Code (UC)
Only 1 user code can be programmed at a time.
1
Touch the keypad to wake up the safe.
2 Press: "PROG" – "FACTORY CODE (FC)"
(found on the back of this owner's manual).
3 The Program indicator light will blink.
4 Press the five digit user code you have chosen
for your safe.
Deleting a User Code
1
Touch the keypad to wake up the safe.
2 Press: "PROG" – "FACTORY CODE (FC)"
(found on the back of this owner's manual).
3
The Program indicator light will blink.
4
Press: "0" –"0" –"0" –"0" –"0"
NOTE: The electronic lock will NOT indicate that it has
deleted the user code—please test code to make sure it has
been deleted.
Programming the Secondary Code (SC)
Only 1 user code can be programmed at a time.
1
Touch the keypad to wake up the safe.
2
Press: "PROG" – "PROG" – "PROGRAMMED USER CODE (UC)"
3
The Program indicator light will blink.
4
Press the five digit secondary code you have chosen for this safe.
Deleting a Secondary Code
1
Touch the keypad to wake up the safe.
2 Press: "PROG" – "PROG" – "PROGRAMMED USER CODE (UC)"
3
The Program indicator light will blink.
4
Press: "0" –"0" –"0" –"0" –"0"
NOTE: The electronic lock will NOT indicate that it has
deleted the user code—please test code to make sure it
has been deleted.
Lifetime After-Fire Replacement Guarantee
If your SentrySafe product is in a fire it will be sealed shut making it necessary for it to be pried open. To help your family begin again, SentrySafe will ship a replacement
free of charge. To be eligible for the After-Fire Replacement Guarantee you (the original owner) must register your product using the included registration form or by visiting
SentrySafe.com/MyProfile.
For more information about the Lifetime After-Fire Replacement Guarantee, visit SentrySafe.com/AfterFireReplacement.
Programming Safe Features
BATTERY AUXILIARY OVERRIDE
If battery power in the safe is running low and cannot operate the
safe, you will need to use the Battery Auxiliary Override feature to
open the safe.
IMPORTANT: This should not be used as a primary means to
gain entry into the safe.
1
Open the silicone cap found on the side
of the lock.
2
Insert a 9 volt battery into this slot.
3 Touch the keypad to wake up the safe.
4
Enter your five digit code.
5
Turn handle to open safe.
DO NOT use rechargeable batteries or any other type of
non-alkaline battery.
Programming Safe Features
OTHER PROGRAMMABLE SAFE FEATURES
Length of Interior Light
NOTE: The Factory Code (FC) or User Code (UC) must be
entered to program safe settings. A secondary code cannot
be used.
1
Touch the keypad to wake up the safe.
2
Press: "0" – "PROG" – "PROG" – "(FC)" OR "(UC)" – "2"
3
Press: "0" to program to turn off
"1" to program for 30 seconds
"2" to program for 60 seconds
Digital Keypad Sound On/Off
1
Touch the keypad to wake up the safe.
2
Press: "0" – "PROG" – "PROG" – "(FC)" OR "(UC)" –"1"
3
Press: "1" to turn on the digital keypad sound or
Press: "0" to turn off the digital keypad sound
Cleaning Your Keypad
Use a soft cloth or microfiber cloth to wipe the surface of your lock
to remove fingerprints.
Safe Warnings and
Important Information
• This product is not intended for the secure
storage of all materials. Items such as
firearms, other weapons, combustible
materials and medication should not be
stored in this unit.
• DO NOT store delicate items directly in your safe.
– In order to protect your valuables from potential threats of
flood, your safe is equipped with an airtight gasket. Because
of this gasket, moisture in the air could potentially be locked
inside your safe and accumulate inside your safe.
– The desiccant bag included in your safe during shipment
should be left inside your safe. DO NOT DISCARD IT. It is
intended to help absorb moisture. Replace or recharge your
desiccant bag every 6 months for optimum performance.
– If you choose to store delicate items such as jewelry with
working parts, watches, stamps or photos in your safe, we
recommend putting them in an air-tight container prior to
placing in the safe for storage.
– NOTE: SentrySafe will not be responsible for any damage or
loss of items placed in the unit due to moisture.
• DO NOT store pearls in this safe unit. In the event of a fire, the
interior of your safe may reach up to 350˚F. While this temperature
is safe for your paper documents, digital media
and other valuables, pearls can be damaged at much
lower temperatures.
• DO NOT store any film based technology or media in
this safe.
– This product is not intended to protect computer floppy disks
or diskettes, film cartridges, tapes, audio/video cassettes or
photo negatives.
• Your safe is only part of your total security protection.
– SentrySafe recommends that you store your safe in closets,
offices, basements, bedrooms and any other locations that
are convenient for you but out of direct line of sight from
prying eyes. The location of the safe does not affect the
safe's ability to protect your valuables inside.