Publicidad
Idiomas disponibles
Idiomas disponibles
Note:
Parts included
Preparation
Countertop
requirements
min.30"
(76,2cm)
Additional materials may be necessary for installation in solid surface countertops.
Contact the countertop manufacturer.
1.
Hold down brackets
2.
Clamping screws, #10 32 x2 1/2" (63,8 mm) (4)
3.
Sheet metal screws, #8 x 3/8" (9,5 mm) (4)
4.
Washers (4)
5.
Heat shield
_1/4"
(6 mm)
2 1/2" (63.8mm)
Setback Distance
1" (25.4mm)
Flat Area
19 7/8 - 20"
(505 - 508mm
Flat Area
1 1/4" (31.8mm),_
3/4 - 28 7/8"
(731 - 734mm)
(25.4mm)
Flat Area
1" (25.4mm
After preparing cutout, remove shavings as they can affect the function of electrical
components.
WARNING: To reduce the risk of ignition combustible materials surround the
installed cooktop are not permitted.
Solid surface countertops often require special installations. For example, heat
reflective tape and rounded corners may be necessary. Contact the countertop
manufacturer for instructions specific to your countertop.
5
Publicidad
