Descargar Imprimir esta página

Sylvania 6427GFF Manual Del Propietário página 14

Ocultar thumbs Ver también para 6427GFF:

Publicidad

Idiomas disponibles

Idiomas disponibles

3
Set the AUTO PRESET CH.
NOTES:
. tf "D.S. T (Daylight Saving)" and "TIME ZONE" is not set.
you cannot select "AUTO PRESET
CH".
. Make sure if the TV is connected
to antenna or cable,
When antenna
is connected,
select "AUTO PRESET CH
(TV/DTV)" at the procedure
below.
When connected
to
CAT_ select "AUTO PRESET
CH (CATV)",
,, Here describes the case for searching and
memorizing channels for DTV/TV.
,, Using [OH A/v'] on the remote control, select
"AUTO PRESET CH(DTV/TV)".
1 PLEASE C ONNECT ANTENNA TO
THEUNiT
2 SETUPTHE ITEMS WITH
&,rANDY BUTTONS
DST (Daylight Saving)
[ON]
TIME ZONE
IALASNA]
_- AUTO PRESET CH(DTV'rV)
AUTO PRESET CH(CATV)
,, When you press [VOL A] on the remote control,
scanning the channels in both analog and digital
modes will automatically start.
AUTO PRESETCH:DTVfFV
_I_
,, When scanning is completed, the memorized
smallest channel will be displayed.
NOTES:
. The initial AUTO PRESET
CH function can be executed for
either DTV/TV or CATV only once. If you want to scan both
DTV/TV and CAT_ you need to select "CHANNEL
SET" in
the MENU screen to scan and memorize
another channels
after
initial
presetting
is completed.
(Refer
to page
28)
. You can exit the initial AUTO PRESET menu by [MENU]
on
the remote control.
. When you press [MENU]
while scanning,
the scanning is
interrupted
and the memorized
smallest channel is dis-
played.
. If you press [POWER],
the power will be turned off. When
the scanning
is not completed,
initial AUTO PRESET
screen
is displayed
every
time you
turn
on
the power.
. When no channel can be received by AUTO PRESET
CH,
"NO TV SIGNALS" is displayed on the screen.
NO TV SIGNALS
M EN
S6BE E N
This section describes the overview of the MENU
screen displayed when you press [MENU] on the
remote control. For more details, see the reference
page for each item.
The MENU screen consists of the function setting
items below.
• PICTURE
CHANNEL SET
[ENG]iESPiFRA
V-CHIP SET UP
CAPTION[OFF]
DTV SETUP
'_ PICTURE
You can adjust the picture quality (BRIGHT, CON-
TRAST, COLOR, TINT, SHARPNESS).
(Refer to "PICTURE ADJUSTMENT"
on page 20).
,, CHANNEL
SET
You can automatically scan the receivable chan-
nels and add or delete the channel as necessary.
(Refer to "AUTO PRESET CH" on page 28).
ENG/ESP/FRA
You can change the language (ENGLISH, SPAN-
ISH, FRENCH) displayed in the MENU screen.
(Refer to "LANGUAGE SELECTION"
on page 15).
V-CHIP SET UP
You can set the viewing limitations.
(Refer to "V-CHiP" on page 24).
CAPTION
You can change the display format for CLOSED
CAPTION, which displays the dialogue of a TV
program or other information across the screen.
(Refer to "CLOSED CAPTION" on page 21).
DTV SET UP
You can set the screen display or CAPTION in the
DTV mode.
(Refer to "CHANGING THE SCREEN DISPLAY
MODE" on page 19).
NOTES:
. "DTV SET UP" can be displayed only in the DTV mode.
* To move to the normal screen, press [MENU].
EN

Publicidad

loading