Publicidad
Idiomas disponibles
Idiomas disponibles
This section describes how to adjust the volume
when viewing TV. The MUTE function, which is use-
ful when you have a visitor or a phone call, will be
also described.
uu
(:D (2:) (:D
G:) G:) G:)
(:_ (:_::)@ (2D
ooo_
VOL A/V
MUTE
1 Using [VOL A/V]
,, You can adjust the audio volume with [VOL z:dV]
on the remote control.
,, The volume bar is displayed at the bottom of
the screen when adjusting the volume.
,, Same operation is available with [VOL AP]
on
the front panel of the main unit.
VOLUME
_I_
2
Using [MUTE]
,, Press [MUTE] on the remote control to mute
the sound.
The colored volume bar is displayed on the
screen while muting.
S
¢Hi :6 AU#1 e
This section describes how to switch the audio in
the analog mode and how to switch the audio lan-
guage in the digital mode.
_
AUDIO
1 Switch the audio.
,, Every time you press [AUDIO], the audio will
be switched as below.
lN]
P]
NO]
MAIN
: Outputs main-audio.
SAP
: Outputs second audio channel,
MONO : Outputs mono-audio.
2
Switch the audio language.
,,When you press [AUDIO] on the remote con-
trol, the currently selected language and the
number of received languages will be displayed
on the screen.
Audio
I---
(5
Z
Z
O
VOLUME
IIIIIIIIIIIIIIII
,, To release the MUTE status, press [MUTE]
again or press [VOL AFT].
,, Every time you press [AUDIO] on the remote
control, the language will be switched.
,, Languages you can switch differ depending on
the receiving broadcast.
NOTE:
will not
Even if you press [AUDIO]
in external input, the audio
be switched,
EN
Publicidad
