Publicidad
Idiomas disponibles
Idiomas disponibles
)NAL SHEET FOR 6427GFF
You are kindly requested to read the additional instruction below.
[ANTENNA
/ BASIC CABLE CONNECTION]
When connectinq TV to antenna
*For digital signal
1) Connect the RF cable or antenna cable on your home outlet to the ANT. IN jack of this TV.
When connectinq TV to basic cable (without box) *For analog reception
only
1) Connect the RF cable or incoming cable on your home outlet to the ANT. IN jack of this TV.
NOTES:
• Foryour
safety and to avoid damages
to the unit, unplug the antenna
cable from the ANT IN jack before moving the unit.
• If you use an antenna in order to receive analog TV, the same antenna
generally
will work for DTV reception.
Outdoor
or attic antennas
will be more effective
than set-top versions.
• Some cable channels cannot be viewed when the TV is connected
to an aerial antenna because DTVprogram
does not cover all
cable channels.
You can watch them by switching
to the cable connected
to CATV.
• To easily swith between
antenna and cable wires, you can purchase
"Antenna Selector'commercially
available.
*Once connections are completed, turn on the TV and begin initial setup.
Channel scanning is necessary for the TV to memorize all available channels in your area if using antenna or
basic cable. (Refer to "INITIAL AUTO PRESET" on page 13.)
IEMN20829
Printed in Malaysia
L3820UA 4r 4r 4r 4r 4r
Publicidad
