SAFETY INSTRUCTIONS FOR POWER INVERTER
WARNING:
followed, including the following:
Read all the instructions before using the product.
To reduce the risk of injury, close supervision is necessary when the product is
used near children.
Do not put fingers or hands into the product.
Use of an attachment not recommended or sold by power pack (inverter)
manufacturer may result in a risk of fire, electric shock, or injury to persons.
To reduce risk of damage to the electric plug and cord, pull the plug rather than
the cord when disconnecting the power pack (inverter).
Do not use a battery pack or appliance that is damaged or modified. Damaged or
modified batteries may exhibit unpredictable behavior resulting in fire, explosion,
or risk of injury.
Do not operate the power pack (inverter) with a damaged cord or plug, or a
damaged output cable.
Do not disassemble the power pack (inverter), take it to a qualified service person
when service or repair is required. Incorrect reassembly may result in a risk of fire
or electric shock.
To reduce the risk of electric shock, unplug the power pack (inverter) form the
outlet before attempting any instructed servicing.
When charging the internal battery, work in a well ventilated area and do not
restrict ventilation in any way.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or burns.
Do not expose a power pack (inverter) to fire or excessive temperature. Exposure
to fire or temperature above 265 °F (130 °C) may cause explosion.
Have servicing performed by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the product is maintained.
When using this product, basic precautions should always be
56-VOLT POWER INVERTER — PAD1800/PAD1800-FC
5