Sony DSC-1024HD Manual De Instrucciones página 39

Sem romana
EP De a
O
i (28 He LS ES CAC
Samco
H/V SIZE buttons ZOOM - button
You can zoom up the picture making it 2 , 3 or 4 times larger
than the original size.
You can also shift the position of the picture so that it fits in the
screen, or adjust the vertical and horizontal size of the picture
separately.
The adjustments can be carried out for the three inputs
separately.
Zooming up the picture
1 Display the picture on the screen.
2. Press the ZOOM + button.
zoou\ )
Each time you press the ZOOM + button, the picture is
magnified by 2, 3 and 4 times respectively.
To zoom dewn, press the ZOOM - button.
ll
ZOOM x1 Px2 x3 x4
3 Adjust the position of the close-up picture by pressing
the CENT ¢/5/¢/e buttons. '
¢/%: toshift the picture upward/
downward (V CENT)
</®; to shift the picture to the
right/left (H CENT)
+
aa
LIS .
+
at
HCENT = } 50
The position of the picture is indicated on the screen by the
adjustment bar and value 0 to 100. The factory preset value is
50.
Resizing the picture
Press the H/V SIZE +/—- buttons to resize the picture.
V SIZE +: to expand vertical size
V SIZE -: to reduce vertical size
HSIZE +: to expand horizontal size
H SIZE -: to reduce horizontal size
HSiZe oa} 50
The size of the picture is indicated on the screen by the
adjustment bar and value 0 to 100. The factory preset value is
50 (except the HDTV or 64 k input).
Aspect ratio display
As the picture size changes by the H/V SIZE button, the unit
calculates the aspect ratio of the converted picture and displays
it in decimal values on the screen together with the adjustment
bar and value.
Example: 4 : 3 is displayed 1.33: 1
16 : 9 is displayed 1.78: 1
ASPECT 1.33:1
H SIZE
The aspect ratio is displayed only when a preset signal is input.
If an HDTV signal is input, the aspect ratio is displayed based
on the Japanese HDTV standard (1920x1035). For the preset
signals, see page 49.
Restoring the original picture size and position
Use GEOM RESET on the MENU 1 screen. (See page 41.)
39