Publicidad
Idiomas disponibles
Idiomas disponibles
FUNCTIONS
1.The principle of humidification by cooling: Using a synchronous motor
or pump, it takes cooling water from the tank. After reaching the top,
the water flows through the wetted pad, then it blows cool air around
the wetted pad through the rotational wind wheel.
2. Electronics control: safe and durable.
3. Adjustable speed: Choose between low, medium and high.
4. Wind type: Nature, normal and sleeping wind.
5. Humidification function: The appliance uses ice crystal refrigeration
and humidification technology. It can cut down the temperature of the
air vent and raise relative humidity, preventing it from air drying.
6. Delivers wind at wide angles: The blades will swing automatically. The
angle can also be changed with your hands. Choose a direction of up
or down.
7. Remote control: Control the unit from distance.
8. Removable air filter and cooling pad: Easy to clean – use a soft brush
and detergent.
INSTALLATION AND OPERATION GUIDE
1.Remove the unit from its packaging.
2.Check the power, ensuring they match the rating label.
3.Place the unit on a flat surface. Assemble the castors with a wrench.
4.Take out the tank and pour clean water inside.
① Please pay attention to the water level.
② Pour over the 'MIN.' level but no more than
the 'MAX.' level.
③ For a cooling effect, place an ice box or ice
into the tank.
5. Always use clean water – do not keep the
same water in the machine for more than
three days.
Attention: Cut the power when you pour water into the tank.
3
Publicidad
