Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Estimated maximum lifting forces as tested on different materials
FR
ES
Glass
Ceramic tile
Metal
Plastic
Wood
Rough concrete
Dry cast pavers
Drywall
NOTICE: When the vacuum level drops below -0.65 Bar (-65 kPa), the GRABO® Pro-Lifter 20 will
automatically restart the pump (when the pump is switched on), thereby achieving the pressure
required for use.
General specifications
Running cycles (on full charge)
Rated air flow
Applicable surface type
SCOPE OF DELIVERY
NOTICE: The exact scope of delivery may change, but it will always contain the items listed below.
If your delivery contains any additional items, these will be listed separately. See Spare Parts for
more information on ordering spare parts.
BASIC GRABO® PRO-LIFTER 20 SCOPE OF DELIVERY:
GRABO® Pro-Lifter 20 (tool only)
l
Battery
l
Operator's manual
l
12
Perpendicular holding force
170 kg/375 lbs
170 kg/375 lbs
110 kg/242 lbs
100 kg/220 lbs
100 kg/220 lbs
80 kg/176 lbs
80 kg/176 lbs
75 kg/165 lbs
Parallel holding force
⓫
120 kg/265 lbs
120 kg/265 lbs
110 kg/242 lbs
100 kg/220 lbs
65 kg/143 lbs
80 kg/176 lbs
80 kg/176 lbs
65 kg/143 lbs
900 ON-OFF cycles of 10 seconds
20 l/min (0.7cfm)
Peak/valley heights less than 3 mm/0.1 inch, arc
less than 5°
Multi-socket battery charger
l
Fabric bag OR Blow mold case
l
⓬
Publicidad
