Publicidad
Idiomas disponibles
Idiomas disponibles
EN
EXPLANATION OF SYMBOLS USED ON TOOL
FR
❷ Read the operator's manual before use
ES
❸ and ❹ Wear protective shoes and gloves
NOISE EMISSION/VIBRATION
A-weighted sound pressure level LpA=79.4 dB(A), uncertainty K=3 dB(A). A-weighted sound
l
power level LwA=71.4 dB(A), uncertainty K=3 dB(A).
Vibration total value=1.240 m/s
l
has been measured in accordance with a standard test method and may be used for comparing
one tool with another. The declared vibration total value may also be used in a preliminary
assessment of exposure.
! WARNING: The vibration emission during actual use of the power tool can differ from the
declared total value depending on the ways in which the tool is used. It's necessary to identify
safety measures to protect the operator based on an estimation of exposure in the actual
conditions of use (under consideration of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in addition to the trigger time).
TRANSPORT
The lithium-equivalent content in the batteries is below applicable limit values. Regulations
governing hazardous goods may be relevant when transporting several batteries. In this case, it
may be necessary to comply with special conditions, such as those governing packaging.
Always make sure the national installation regulations are observed.
ASSEMBLY
CONNECTING A STRAP TO THE GRABO® PRO-LIFTER 20 ❺
As an option, you can attach a strap to the GRABO® Pro-Lifter 20 to carry the device safely.
l
1. Locate the four attachment rings Ⓗ .
2. Connect a strap to any two of these attachment rings.
3. Secure each of the clips at the ends of a strap into an attachment ring.
OPERATION
LIFTING TECHNIQUES
Plan ahead. Know what you are lifting and how you will lift it. Be aware of the weight of the
l
object. Determine whether or not it is safe to lift on your own. Make sure the work area is flat,
dry and clear of debris.
Check your path. Make sure the lift path is clear. Remove any tripping hazards or debris.
l
Check for any wet or slick surfaces.
Use ergonomic equipment. Use lift assists such as a forklift, dolly, cart, hand truck, or hoist.
l
18
2
, uncertainty K=0.11 m/s
2
. The declared vibration total value
Publicidad
