Publicidad
Idiomas disponibles
Idiomas disponibles
iNSTALLATiON iNSTRUCTiONS
Excessive
Weight
Hazard
Use two or more people
to move
and install
washer.
Failure
to do so can result
in back or other
injury.
It is necessary
to remove
all shipping
materials
for proper
operation
and to avoid excessive
noise from washer.
1. Move washer
to within
4 ft (1.2 m) of its final location;
it must
be in a fully
upright
position.
NOTE:
To avoid
floor
damage,
set washer
onto
cardboard
before
moving
it and make sure lid is taped
shut.
\
3. Remove tape from
washer
lid, open lid, and remove
cardboard
packing
tray from tub. Be sure to remove
all parts from tray.
NOTE:
Keep tray in case you need to move washer
later.
2. To avoid
damaging
floor,
place cardboard
supports
from
shipping
carton
on floor
behind
washer.
Tip washer
back and
place on cardboard
supports.
Remove shipping
base. Set
washer
upright.
iMPORTANT:
Removing
shipping
base is necessary
for proper
operation.
If your washer
includes a sound shield° please
refer
to the instructions included with the sound shield to install it
at this time.
Publicidad
