Precautions
• The Image Database File is damaged.
Check
the data base file by touching _
(MENU)
[Show others] _
[REPAIR IMG.DB El
(under _
[MANAGE MEDIA[ category)
the recording medium.
• The memory card is damaged.
Format the
memory card with your camcorder
(p. 63).
• Incompatible
memory card is inserted (p. 22).
_2 o--.
• Access to the memory card was restricted
on
another device.
• There is something
wrong with the flash.
_qj_
• The amount of light is not suf}]cient. Use the
flash.
• The camcorder
is unsteady. Hold the camcorder
steady with both hands. However, note that
the camera-shake
warning indicator does not
disappear.
• The drop sensor function
is actNated. 52)u
may not be able to record nor play back
images.
• The recording media is full. Delete unnecessary
images (p. 36).
• Photos cannot be recorded during processing.
\\_ait tbr a while, then record.
On use and care
• Do not use or store the camcorder
and
accessories in the tbllowing locations:
- An3_vhere extremely hot, cold or hmnid.
Never leave them exposed to temperatures
above 60 °C (140 °F), such as under direct
sunlight, near heaters or in a car parked in
the sun. They may malfunction
or become
defurmed.
- Near strong magnetic fields or mechanical
vibration. The camcorder may malfunction.
- Near strong radio waves or radiation. The
camcorder may not be able to record properl>
- Near AM receivers and video equipment.
Noise may occur.
- On a sandy beach or awwhere
dust> If
sand or dust gets in your camcorder, it may
malfunction.
Sometimes
this malfunction
cannot be repaired.
- Near windows or outdoors, where the LCD
screen, the viewfinder or the lens may be
exposed to direct sunlight. This damages the
inside of the viewfinder or the LCD screen.
• Operate your camcorder on DC 6.8 V/7.2 V
(battery pack) or DC 8.4 V (AC Adaptor).
• For DC or AC operation,
use the accessories
recommended
in these operating
instructions.
• Do not let your camcorder
get wet, fbr example,
ficom rain or sea water. If your camcorder
gets wet, it may malfunction.
Sometimes
this
malfunction
cannot be repaired.
• Ifa W solid object or liquid gets inside the
casing, unplug your camcorder and have it
checked by a Sony dealer be*bre operating
it
any further.
• Avoid rough handling,
disassembling,
modif_qng, physical shock, or impact such
as hammering,
dropping or stepping on the
product. Be particularly
care*hl of the lens.
• Keep the camcorder
turning ot}'when you are
not using your camcorder.
• Do not wrap your camcorder with a towel, fbr
example, and operate it. Doing so might cause
heat to build up inside.
• When disconnecting
the power cord (mains
lead), pull it by the plug and not the cord (lead).
• Do not damage the power cord (mains lead)