Publicidad
Idiomas disponibles
Idiomas disponibles
Generac Portable P roducts 2,500 PSI High Pressure Washer
KNOW
YOUR
PRESSURE
WASHER
Read this owner's manual
and safety rules
before
operating
your high pressure
washer.
Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various controls
and
adjustments.
Save this manual for future reference.
Chemical Injection Siphon/Fitter
Spray Gun
Accessory Tray
Spray Nozzles
High Pressure Hose
Nozzle Extension with
Quick Connect
Gas Tank
Pressure
Control Knob
Water Inlet
Pump equipped with
Automatic
Cool Down System
Accessory
Tray _
Provides convienant storage for
standard and optional accessories, such as brushes, turbo
wands, ect.
Air Filter -- Protects engine by
filtering
dust and debris out
of intake air.
Automatic
Cool Down System -- Cycles w_ter through
pump
when
water
reaches
140°-i45°F.
Warm
water
will
discharge from pump onto ground. This system prevents
internal
pump
damage.
Chemical
Injection Siphon/Filter
-- Use to siphon
detergent or other pressure washer chemicals into the low
pressure stream.
Choke
Lever --
Prepares a cold engine for starting.
Fuel Valve --
Used to turn fuel on and off to engine.
Gas Tank -- Fill tank with regular unleaded gasoline. Always
leave room for fuel expansion.
High Pressure
Hose -- Connect one end to the water
pump and the other end to the spray gun.
Safety Goggles
Air Filter
Throttle Lever
Choke Lever
Fuel Valve
Recoil Starter
(on front of engine)
Oil Fill Cap
High Pressure Outlet
with Quick Connect
High Pressure
Outlet
with Quick Connect -- To
connect high pressure hose.
Nozzle
Extension with Quick Connect -- Allows you to
switch between four different spray nozzles.
Oil Fill Cap --
Fill engine with oil here.
Pressure Control
Knob -- Varies the pressure of the high
pressure spray.
Pump --
Develops high pressure.
Recoil Starter
-- Use for starting the engine manually.
Safety Goggles --
Always use the enclosed goggles or
other eye protection
when running your pressure washer.
Spray Gun -- Controls the application of water onto
cleaning surface with trigger device. Includes safety latch.
Spray Nozzles -- Chemical injection (25°), 0°, 15°, 25°, and
40°: for various high pressure cleaning applications.
Throttle
Lever_Sets
engine in starting mode for recoil
starter and stops a running engine.
Water
Inlet -- Connect garden hose here.
/
4
Publicidad
