SHERCO 250 SEF RACING Manual Del Usuario página 101

COOLING SYSTEM
FILLING THE COOLANT
3
1
- Replace the bleed screw
2
- Refill the coolant into the radiator through the
cap .
1
Approved Coolant
- Fill coolant until is going out from the screw
- Put the screw
Radiator bleed screw
- Continue filling.
- Fill until the coolant reaches the level (approximately
1.1 liters).
- Put the bike on the side stand and follow the rest
of the filling procedure (& p.103).
- Replace the cap
using a new seal.
2
®
Motul Motocool
Factory Line -35°C
back in with a new seal.
3
M6X45
.
1
.
3
8Nm
101