SHERCO 250 SEF RACING Manual Del Usuario página 105

MOTOR MAINTENANCE
REFILLING THE ENGINE WITH OIL
8
1
- Lubricate the filter seal.
11
- Fit a new oil filter
- Seal towards the crankcase (see picture).
- Fit the oil filter
Oil Filter cap
- Install the plug
Magnetic drain plug
- Install the pre-filters
new seal
10
Drain plug
- Remove the engine oil filler cap
- Fill the engine with oil.
9
Motor oil
- Install the engine guard.
1
- Check the oil level in the sight gage (& p.103).
- Add additional oil if necessary.
1
NOTE
The oil filter
WARNING
To protect the environment, oil, oil filters and used material must
be deposited in a collection center and not down the drain or in
the wild.
.
11
cap with a new O-ring.
10
M45
with a new gasket
2
M12
and the plugs
3
.
4
M19
1
10
1L
11
should be replaced at each oil change.
15Nm
.
5
15Nm
with
1
25Nm
(& p.103).
SAE 5w40
105