Publicidad
Custom Settings
Customize settings for improved ease of use.
1 Press and hold the [OK] button for more than 2 seceonds.
The flash will enter custom settings mode.
2 Press 3/4 to highlight items.
3 Rotate the dial to change the highlighted item.
4 Press the [OK] button.
Control panel
16
VQT5F44
Option
Description
AF assist
[A]: Controlled by camera.
lamp
[OFF]: Does not light.
[1/1] to [1/16]: Adjust LED brightness.
LED
brightness
[ON]: Flash control display shows slave mode.
Slave
[OFF]: Flash control display does not show
flash
slave mode.
Flash
[ON]: Flash cable not used.
cable
[OFF]: Flash cable used.
[
]: Display values for FOUR THIRDS lenses.
Zoom
None: Display 35 mm film camera equivalent
display
values.
[m]: Distances displayed in meters.
Distance
[ft]: Distances displayed in feet.
units
Wide
[ON]: Flash detects position of wide panel.
panel
Lighting angle adjusted automatically.
detection
[OFF]: Flash does not detect wide panel position.
Guide
[ON]: Flash output is shown as a guide number.
number
[OFF]: Flash output is shown as a relative value.
display
[ON]: The ISO sensitivity and the aperture are
adjusted to match the camera.
[OFF]: The ISO sensitivity and the aperture of
Auto light
the flash can be adjusted with the dial.
sensing
≥ This can only be used for digital cameras with
communication functions. (Only when the flash
mode is set to [AUTO] or [SL AUTO] mode.)
[25] to [3200]: Display the ISO sensitivity when
Auto ISO
[AUTO] is selected as the flash mode for
display
cameras that can not communicate with the
flash unit.
Publicidad
