Domo DO91125 Manual De Instrucciones página 102

4. Vyberte (odskrutkujte) spodnou skrutku, záves pántu i nastaviteľnú nožičku zo spodnej časti
spotrebiča.
hinge. Then remove the adjustable feet from both
Reverse Door
5. Povoľte závesný kolík pántu, vyberte otočte a kolík opäť dotiahnite.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
oor
move the bottom hinge pin, turn the bracket over and replace it.
oor
Unscrew
move the bottom hinge pin, turn the bracket over and replace it.
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
feet.
6. Všetko (skrutka a záves pántu) namontujte na opačnú spodnú stranu prístroja. Následne dajte späť a
nastavte nožičku tak, aby sa prístroj nekýval.
Unscrew
fitting the bottom hinge pin. Replace both adjustable
7. Place the door back on. Ensure the door is aligned horizontally and
fitting the bottom hinge pin. Replace both adjustable
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
ack on. Ensure the door is aligned horizontally and
7. Na spodnej pánt nasaďte späť dvere. Dvere musia byť vodorovne, aby ich tesnenie priliehalo po
t the seals are closed on all sides before finally
p hinge.
celom obvode. Ak dvere dobre tesní, môžete usadiť aj horný pánt a priskrutkovať ho.
8. Put the top cover and fix it with 2 screws on the back.
ack on. Ensure the door is aligned horizontally and
t the seals are closed on all sides before finally
p hinge.
r and fix it with 2 screws on the back.
9. Fix the thermostat knob.
102
r and fix it with 2 screws on the back.
DO91125
7
Unscrew
Screw
Screw
screw
screw
Screw
screw