Domo DO91125 Manual De Instrucciones página 50

oor
Unscrew
move the bottom hinge pin, turn the bracket over and replace it.
6. Attach the screws and hinge bracket to the opposite side of the bottom. Put the adjustable feet
oor
back into place.
move the bottom hinge pin, turn the bracket over and replace it.
Unscrew
fitting the bottom hinge pin. Replace both adjustable
Unscrew
fitting the bottom hinge pin. Replace both adjustable
ack on. Ensure the door is aligned horizontally and
7. Carefully set the door back into place. Ensure the door is aligned horizontally and vertically so that
t the seals are closed on all sides before finally
fitting the bottom hinge pin. Replace both adjustable
p hinge.
the seals are closed on all sides before finally tightening the top hinge. Insert the hinge back and
screw it to the top of the appliance.
ack on. Ensure the door is aligned horizontally and
t the seals are closed on all sides before finally
p hinge.
r and fix it with 2 screws on the back.
ack on. Ensure the door is aligned horizontally and
t the seals are closed on all sides before finally
p hinge.
r and fix it with 2 screws on the back. 8. Put the top cover back and fix it in place with the screws.
at knob.
r and fix it with 2 screws on the back.
at knob.
at knob.
9. Remove the rubber seal from the door, turn it over, and then put it back on.
50
DO91125
8
8
8
Screw
Screw
Screw
screw
screw
screw