Descargar Imprimir esta página

BOMANN MWG 1956 H CB Instrucciones De Servicio página 80

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
Examples of the above:
1. Press the Stop.Cancel button.
2. Select the desired microwave power by pressing the Micro-
Power button once or repeatedly.
3. Enter the desired cooking time with the help of the arrow
keys.
4. Press the Grill.Combi/Conv.Combi button once or several
times to select one of the C., C.1, C.2, G., G.1 or G.2
programmes.
5. Enter the desired cooking time with the help of the arrow
keys.
For example: 3:00 minutes cooking time at 100% and
microwave power and then 9:00 minutes grilling.
Step
1
2
3
4
Grill.Combi/Conv.Combi
5
6
6. Press the Instant.Start button to start the machine.
After this time has expired the oven switches off and the word
„END" appears in the display. Then take out the food.
NOTE:
In this way it is possible to combine up to 4 different cooking
sequences one after the other. You can also begin the pro-
gramme with a grill/combi or hot air/combi setting.
Special Functions
Automatic Start
You can start the microwave or also a grill/combi or hot air/combi
setting at a predetermined time. To do so, fi rst set the clock.
In order to start the microwave automatically, for example,
please proceed as follows:
1. Press the Stop.Cancel button.
2. Press the MicroPower button once or repeatedly to select
the desired microwave power.
3. Enter the desired cooking time with the help of the arrow
keys.
4. Press the PresetClock button for more than 2 seconds. A
signal is heard and the display changes to the current time.
The fi rst fi gure fl ashes.
5. Enter the desired starting time with the help of the arrow
keys.
6. Press the PresetClock button. A long buzzer signal is
heard.
NOTE:
If another function has been programmed, the correspon-
ding message appears in the display.
For example: 12:30 minutes cooking time at 100% power,
start time 14:20
80
05-MWG 1956 H_05-MWG 1956 H_Meph80 80
05-MWG 1956 H_05-MWG 1956 H_Meph80 80
Button
Display
Stop.Cancel
MicroPower
10 0P
03:00
G.
09:00
Instant.Start
Step
Button
1
Stop.Cancel
2
MicroPower
3
4
PresetClock
5
6
PresetClock
NOTE:
If you would like to see the start time again, press the
PresetClock button.
The device begins operation at the preset time.
WARNING:
Danger of fi re! The device must never be left unattended
during operation. When setting a delayed cooking time
always ensure that when the device is operating it is not
left unattended.
Do not operate the microwave oven when it is empty.
If you take the food out earlier than the set time it is
important to cancel the programme by means of the Stop.
Cancel button.
After the time has expired the device switches off and the word
"END" appears in the display. Now remove the food.
Automatic Reminder
After cooking has fi nished you are reminded every 2 minutes by
a beep to remove the food.
This reminder is switched off when the door is opened or the
Stop.Cancel button pressed.
Disabling
Press the Stop.Cancel button for more than 2 seconds to lock
the device. The fact that the machine is disabled is then shown
in the display. The function of the operating controls is now
blocked. Press the Stop.Cancel button again for longer than 2
seconds to cancel the lock.
Error Messages
During operation „Err0" or „Err1" appears in the display. In this
case there is a problem with the electronic control unit.
Cleaning
Turn the microwave off and remove the mains plug.
Interior
Keep the interior of the oven clean. Splashes and overfl ow-
ing liquids on the walls of the oven can be removed with a
damp cloth. If the oven is very dirty a mild detergent can
also be used. Please do not use any abrasive detergents.
Wipe off the viewing window on the inside and outside
with a damp cloth and remove splashes and stains from
overfl owing liquids regularly.
Display
10 0P
12:30
10:00
14:20
14:20
31.03.2008 10:34:54 Uhr
31.03.2008 10:34:54 Uhr

Publicidad

loading