Translation of the original instructions
Do not operate the device with a damaged
power supply cord or a damaged mains
plug.
Do not use the device if the charging cable
appears to be damaged or assembled
incorrectly in order to avoid any risk of short
circuiting the battery.
Never charge a frozen or damaged battery.
Do not cover the device
Do not place the device near a fire or
subject it to heat or to longterm temperatures
exceeding 50°C
Do not obstruct the cooling vents. Refer to
the installation section before operating the
machine.
The automatic mode of operation and usage
restrictions are explained below in these
operating instructions.
Risk of explosion and fire!
A battery being charged can emit explosive
gas.
• During the charge, the battery must be
• Avoid flames and sparks. Do not smoke.
• Protect the electrical contacts of the battery
Acid projection hazard!
• Wear safety goggles and protective gloves
• If your eyes or skin come into contact with
10
TCB 60 / 90 / 120
placed in a well ventilated area.
against short-circuiting.
battery acid, rinse the affected part of
the body with plenty of water and seek
immediate medical assistance.
EN