Publicidad
Idiomas disponibles
Idiomas disponibles
you want, hold it in place by gripping
the
mower's
lower right handle
bar with
your left hand. Then release
your right
hand from the finger grip to lock the cut-
ting height into place.
NOTE; To ensure
that the deck is securely
locked in one of the seven cutting
posi-
tions, press down on the palm rest after
releasing
the finger grip.
HANDLE
ADJUSTMENT
.....................
O
Your mower has a variable
height handle
adjustment
feature.
To adjust the handle
position,
use the following
procedure:
• Remove
both knobs (1) on the middle
part of the handlebars
and remove the
bolts (2).
• Slide the upper handle
into one of the 3
adjustment
positions
(3), aligning the
holes in the upper and lower handles,
• Insert the bolts and install the knobs,
tightening
securely.
The knobs should
always
be on the outside
of the handles
to avoid interference
with the rear door
and grass bag.
TO STOP
MOWER
To stop mower fully release your grip on
the operator presence control switch,
TO START
MOWER
• Make sure that charger
cord is
unplugged
from the mower.
Insert Safety Key into place on motor
shroud. Push key down until it is seated.
The mower is now operational
and can
be started by activating
the switch sys-
tem.
CAUTION: Never attempt to override the
operation of this switch and key system.
OPERATOR
PRESENCE
CONTROL
SWITCH
\
CAUTION:
Federal
regulations
require an
Operator
Presence Control Switch to be
installed on lawn mowers in order to mini-
mize the risk of blade contact injury, DO
NOT under any circumstances attempt
to
defeat the function
of this switch, Remem-
ber that the blade always turns when the
motor is running.
To operate the operator presence control
switch, first grasp the bail handle (1) and
pull it to the handlebar (2). Then firmly
push the switch lever (3) forward
until it
snaps into the "on" position. To turn the
mower off, just release the bail handle.
1(3
Publicidad
