To Unfold
Handle
Raise the handle section
into place and
secure by tightening
the two knobs.
See
figure below.
WARNING:
For your own safety
DO NOT
use this mower without either the
Grasscatcher
or Mulch Insert in operating
position.
Knobs
Handle
/
/
GRASSCATCHER
ASSEMBLY
• Slide the grassbag
onto the grasscatcher
frame.
(See Fig. A)
• The grassbag
has attachment
clips sewn
around
the bag opening.
• Attach
the two top clips to the frame,
then attach the side clips, and lastly the
bottom
clip. (See Fig. B)
• Refer to "To Install Grasscatcher"
instruc-
tion before attaching
to mower.
TO
INSTALL
GRASSCATCHER
• Reach down between
the mower handle
and raise the rear door to a vertical posi-
tion. (See Fig. A)
• Remove
the mulch insert. See page 12
"To Remove
Mulch Insert".
• Pick up the grasscatcher
by the handle
and lower the grasscatcher
between
the
lawnmower
handles.
Position the grass-
.catcher
hanger hooks on the metal rod
under the rear door. (See Fig. B).
• Release the rear door.
WARNING:
Never operate the mower
unless the hanger hooks on the grass-
catcher are seated properly, and the rear
discharge
door rests firmly against the top
of the grasscatcher.
6