cecotec PROCLEAN 6110 Manual De Instrucciones página 29

ENGLISH
4 40%
3 30%
2 20%
1 10%
Reset
Press the Reset button to clear all previous settings.
Start/Stop
Press the Start/Stop button to start or stop operation.
Automatic cooking
Use this mode for multi-stage cooking. It allows cooking at different power levels at different
pre-set times, changing from one stage to another automatically.
Clock setting
- When the microwave is on Standby, press the Clock button.
- Press the corresponding keys on the number pad to enter the desired time. You must press
at least three keys to set the clock (one for hours and two for minutes).
- Press the Clock button again to confirm time.
Warning:
The clock is 24 hours. When the microwave is first plugged in or when power resumes after a
power interruption, the display panel will show ENTER, CLOCK, TIME. If you prefer not to have
the clock displayed, press the Reset button. You can check the clock time while cooking is in
progress by pressing the Clock button.
Example: Setting clock at 12:30
Steps
1 After powering up, the display
panel shows the colon sign.
Press the Reset button once
or wait for 30 seconds.
2 Press keys "1", "2", "3", "0".
3 Press the Clock button to
confirm.
56 PROCLEAN 6110
PROCLEAN 6120 FULL INOX
P40 and P30: Medium-Low
power, 40% and 30%, perfect
for defrosting food.
P20 and P10: Low power, 20
and 10%. Perfect for keeping
food warm.
Display
:
12:30
Setting the timer
- You can use the timer function independently, even while the microwave is operating.
- Press the Timer button.
- Enter cooking time by pressing the number keys. The timer is set in minutes and seconds,
from left to right. The maximum cooking time is 99 minutes, 99 seconds.
- For example, to set:
1. 5 seconds: Press 5.
24 minutes, 5 seconds: Press 2, 4, 0, 5.
2.
3. Press the Start/Stop key to confirm.
Warning
- The timer countdown can be seen in display for 3 seconds before it returns to the standby
mode.
- Press Timer and then press Reset to cancel timer during countdown.
Setting cooking time and power level
One-stage cooking
1. From the home display, use the number keys to enter the desired cooking time. The
cooking time can be from 1 second to 99 minutes and 99 seconds. If the desired cooking
time is more than 1 minute, enter numbers for both minutes and seconds. For example: to
set 20 minutes, enter 2, 0, 0, 0.
2. Press the On button and set the desired power level using the number keys.
Press the Start/Stop key to start operation.
3.
Example: Cooking at P80 for 10 minutes.
Steps
1 After powering up, the display
panel shows the colon sign.
Press the Reset button once
or wait for 30 seconds.
2 Press the On button
repeatedly to select the
desired power level .
3 Set the cooking time by
pressing number keys "1",
"0","0", "0".
4 Press the Start/Stop button
to start operation. The LED
will display the countdown.
ENGLISH
Display
:
80P
10:00
PROCLEAN 6110 57
PROCLEAN 6120 FULL INOX