Beper VE.113H Manual De Instrucciones página 12

Stand Fan Use instructions
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly flammable mate-
rials, gases, burning flames, heaters.
Do not allow children, disabled people or every people without expe-
rience or technical ability to use the appliance if they are not properly
watched over. Close supervision is necessary when any appliance
used by or near children.
Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unservice-
able by simply cutting the supply cable after disconnecting the plug
from the socket.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
USE INSTRUCTIONS
Do not plug the supply cord before assembly every the parts of the fan.
Before using, check the integrity of the supply cord and eventually remove possible nodes.
Place the fan on a flat and stable surface in a dry place.
Keep away to a reasonable distance the fan from walls, doors, windows or every object that could
avoid the appliance to work in the correct way.
Do not cover the body or grid of the fan when the appliance is working.
Do not plug objects into the grid or inside the appliance.
Do not pull on the supply cord to unplug the appliance.
After using the fan, unplug the cord supply.
If the fan must be stored for a long period or non-used, replace the fan in the original packaging in
a dry place. For every next use, check that the fan is clean and that the blades turn in the correct
way (motor off).
12