IKEA Luftig Instrucciones De Instalación Y Manual De Uso Y Cuidado página 11

Replacing the Incandescent Light Bulb
Turn off the range hood and allow the light bulb to cool.
1. Disconnect power.
2. Squeeze the plastic lens cover and remove it from the hood.
A. Light bulb socket
B. Lens cover
3. Screw light bulb into socket.
4. Replace lens cover by squeezing cover and inserting tabs
into slots.
5. Reconnect power.
If new light does not operate, make sure the lamp is inserted
correctly before calling service.
WIRING DIAGRAM
Light Switch
On - Off
————
/
Motor Characteristics
Power Supply 120 VAC
Frequency 60 Hz
Amperage 0.9 +10% A
Wattage Rating [50 +10% Watts
Motor Resistance
White - Red 22.3 +10% Ohms
White - Black | 13.4+10% Ohms
Motor Switch
Low - Off - High
\ /
C19
Ground
Screw
11