Descargar Imprimir esta página

Bosch EasyHeat 500 Manual Original página 13

Ocultar thumbs Ver también para EasyHeat 500:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
Stripping paint from window frames (see figure B)
The glass protection nozzle (6) must be used for this
u
application. There is a risk that the glass may break.
You can remove the paint from profiled surfaces with a suit-
able spatula and brush it off with a soft wire brush.
Thawing frozen water pipes (see figure C)
Before applying heat to the pipe, check it is in fact a
u
water pipe. Water pipes and gas pipes often look
identical from the outside. Gas pipes must under no cir-
cumstances be heated.
Attach the angle nozzle (7). Gradually heat the frozen points
of the pipe, starting at the outlet and moving back towards
the inlet.
Take great care when warming plastic pipes and pipe con-
nections to avoid causing damage.
Shaping plastic pipes (see figure D)
Attach the reflector nozzle (8). Fill plastic pipes with sand
and seal them on both sides to prevent the pipe bending.
Carefully and evenly heat the pipe by moving the tool back
and forth from one side to the other.
Killing weeds (see figure E)
Fit the reducing nozzle (9) (accessories). Select the highest
power setting. Aim the heat jet at the weeds. This will cause
the weeds to die off in the following days. It is not necessary
to completely burn the weeds.
Heat-shrinking (see figure F)
Attach the reflector nozzle (8). Choose the diameter of the
heat shrink plastic tube (10) suitable for the workpiece.
Evenly heat the heat shrink plastic tube until it fits closely
against the workpiece.
Maintenance and Service
Maintenance and Cleaning
Pull the plug out of the socket before carrying out any
u
work on the power tool.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Bosch Power Tools
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
The power tool, accessories and packaging should be re-
cycled in an environmentally friendly manner.
Do not dispose of power tools along with
household waste.
Only for EU countries:
According to the European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment and its implementation
into national law, power tools that are no longer usable must
be collected separately and disposed of in an environment-
ally friendly manner.
If disposed incorrectly, waste electrical and electronic
equipment may have harmful effects on the environment and
human health, due to the potential presence of hazardous
substances.
Only for United Kingdom:
According to The Waste Electrical and Electronic Equipment
Regulations 2013 (SI 2013/3113) (as amended), products
that are no longer usable must be collected separately and
disposed of in an environmentally friendly manner.
Français
Consignes de sécurité
Lisez attentivement toutes les instructions
et consignes de sécurité. Le non-respect des
instructions et consignes de sécurité peut pro-
voquer un choc électrique, un incendie et/ou
entraîner de graves blessures.
Conservez tous les avertissements et toutes les instruc-
tions pour pouvoir s'y reporter ultérieurement.
Ce décapeur thermique n'est pas
u
prévu pour être utilisé par des en-
fants ni par des personnes souf-
Français | 13
1 609 92A 90M | (18.07.2023)

Publicidad

loading

Este manual también es adecuado para:

Universalheat 600