Descargar Imprimir esta página

Welby 53497 2018 Manual Del Usuario página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

LANYARD INSTALLATION
Lanyard installation: Thread end of lanyard through hanging
hole as shown at above left.
6
cs@grahamfield.com
thread here
OPERATION INSTRUCTIONS
1
Install two AAA batteries according to the previous Battery
Installation instructions.
2
Use a clean, soft cloth dampened with 70% isopropyl
alcohol to clean both the silicone contact surface inside
the oximeter and the test finger before and after each test.
3
Insert one of your fingers into the pulse oximeter's rubber
opening as shown above.
4
Press the switch button on front panel (shown above) once
to turn the pulse oximeter on.
5
Keep your hands still while testing. Do not shake your
finger while testing. Do not move your body while testing.
6
Read the data from the display screen.
7
Pressing the power switch for longer than one second will
adjust the brightness of the oximeter. There are 10 levels
of brightness; the default is level four.
AFTER SALES SUPPORT
800-347-5678

Publicidad

loading

Productos relacionados para Welby 53497 2018