Publicidad
Idiomas disponibles
Idiomas disponibles
Adjust Brightness -
To adjust the brightness of a color or show that is being displayed, push the ENTER/BRIGHTNESS
button. Adjust the brightness by turning the CENTER KNOB clockwise (increase brightness) or coun-
terclockwise (decrease brightness) and briefly pushing the CENTER KNOB to save. Note that the
default brightness is 100% (10 LEDS lit up) and the brightness will change in increments of 20%
down to 20% (2 LEDS lit up)
While the desired
color or show is
displayed, push the
ENTER/BRIGHT-
NESS button
Adjust Speed of Shows -
To adjust the speed of a show that is being displayed, push the SPEED/RECYNC button. Adjust the
speed by turning the CENTER KNOB clockwise (increase speed) or counterclockwise (decrease
speed) and briefly pushing the CENTER KNOB to save. Note that this has no affect on solid colors.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
OmniDirect Lite mode only
1
Rotate CENTER
KNOB clockwise to
increase brightness
and counter clock-
wise to decrease
brightness
OmniDirect Lite mode only
2
Rotate CENTER
KNOB clockwise to
increase speed and
counter clockwise to
decrease speed
2
Briefly push the
CENTER KNOB to
1
While the desired
show is displayed,
push the SPEED/
RECYNC button
3
Briefly push the
CENTER KNOB to
save
3
save
6
Publicidad
