Kärcher VCS 5 Cordless Manual De Instrucciones página 18

Cyclone filter
12
Dust container
13
Unlock button of dust container
14
One-step empty dust button
15
Extension wand
16
Crevice nozzle on accessory storage
17
Charging storage dock
18
LED lights
19
Plug adapter
20
Power supply
21
Charger
WARNING
Only charge the appliance using the original charger
enclosed or with a charger approved by KÄRCHER.
Use the following adapter:
Appliance type:1.198-295.0
6.654-781.0
PS07
Power supply
(1) Power supply: 6.654-781.0
(2) Plug adapter: 9.765-656.0 (using the plug adapter
according to the actual situation)
Use the following adapter:
Appliance type:1.198-296.0
1. Insert the extension wand into the vacuum cleaner.
Illustration B
1
For removal, press the unlock button, and unplug
the extension wand.
2. Insert the extension wand into the floor nozzle.
Illustration C
For removal, press the unlock button, and unplug
the floor nozzle.
2
Installing the storage dock
1. Insert the storage holder into the storage base.
Illustration D
Storage holder
1
Storage base
2
Note
The appliance will be shut down automatically if it is in
danger of overheating. Ensure that the brush roller is
not blocked in any way.
Note
The appliance does not work during the charging
process.
The charging time is approx. 3 - 4 hours.
The appliance must be fully charged before first use.
You can charge the appliance in 2 different ways:
using the charging storage dock
using the charging socket on device
1. Insert the connector of the charger into the charging
interface of the storage dock.
Illustration E
2. Connect the power cable of charger to the power
supply.
3. Insert the appliance into the charging storage dock.
Illustration F
The charging process starts automatically.
6.654-785.0
PS07
Power supply
Assembly
Operation
Charging
Charging storage dock