GYS Alien+ True Color XXL Manual De Instrucciones página 6

Translation of the original instructions
EN
ALIEN+ TRUE COLOR XXL
SAFETY INSTRUCTIONS
This user's manual includes information on the operation
of the equipment and the precautions to be followed
for the user's safety. Please read it carefully before first
use and keep it in a safe place for future reference.
These instructions must be read and understood before
any operation. Any modification or maintenance
not indicated in the manual must not be undertaken.
Any damage to persons or property caused by use not in
accordance with the instructions in this manual shall not be borne by
the manufacturer. In the event of a problem or uncertainty, consult a
qualified person to handle the product correctly.
Use the welding helmet only for eye and face protection against
harmful ultra violet and infrared radiation, sparks and spatter from
welding.
Never look directly at welding arcs without eye protection when
the arc is initiated. Failure to do so may cause painful inflammation
of the cornea and potentially irreversible damage to the lens which
may result in cataracts.
Look out! Danger of injury if a person wearing a mask and goggles
is hit by particles thrown at high speed.
The mask, filter and shields do not guarantee unlimited protection
against major shocks or impacts, explosive mechanisms or corrosive
liquids. Avoid welding or cutting in these severe environments.
Do not weld or cut above his head with this mask.
Move his face away from the smoky area. Use forced ventilation or
local exhaust to remove smoke.
Oxyacetylene, laser or gas welding and cutting is not permitted
with this mask.
Before each use :
- Carefully inspect the mask and its UV/IR filter.
- Replace worn or damaged parts immediately.
- Replace filter lenses or face shields if they are cracked or scratched
to prevent damage to the user's eyes.
The headband can potentially cause allergies in sensitive individuals.
The operating temperatures of the optoelectronic filter are from
-5°C to +55°C.
The opto-electronic filter in the mask is not waterproof and will not
function properly if it has been in contact with water.
6