Publicidad
Idiomas disponibles
Idiomas disponibles
appliance.
20. CAUTION – Some parts of this product can become very hot and cause burns.
Particular attention must be given when children and vulnerable people are present.
21. This product is fitted with a thermostatic room temperature control.
Only for UK:
A. Do not use two high-power appliances in the same socket.
B. The plug needs to be plugged in fully.
C. Product socket cannot use extension cord.
The socket needs to be conformed to BS1363, the maximum withstand current value
needs to be greater than 13A.
ATTACHING THE LEGS
1. Turn product on its side to start attaching legs.
2. Place a leg on each corner and use 3 screws for each leg.
3. Tighten the screws clockwise until tight on each leg.
4. Turn the unit back up to standing position making sure it is stable.
5. Place the unit in the required location and plug in, it is now ready for use.
NOTE: The drawing below is for illustration purposes only, your product may be slightly
different in looks but the operations are the same.
Legs
Instructions to use
OFF
ON
Fitting Screws
1.Thermostat control knob (TEMPERATURE SETTING)-
Adjust to maintain room temperature
1
2. Flame switch - Switches flame effect and power on/off.
3. Heating setting: please press "
2
4. Heating setting : please press"
3
time for 2000w (can not operate without first press"
4
).
3
" for 1000W.
"and "
"at the same
"
Publicidad
