Publicidad
Idiomas disponibles
Idiomas disponibles
English
5. Symbols
WARNING
The following show symbols used for the
device. Be sure that you understand their
meaning before use.
RP350YBL: Dust extractor
To reduce the risk of injury, user must
read instruction manual.
WARNING
WARNING! The dust extractor may
contain hazardous dust.
Dust class L (light). The dust extractors
are capable of picking up dust class L.
Follow your country's regulations relating
to dusts and to occupational health and
safety.
Permanent filter cleaning
The dust extractor is fitted with an
electromagnetic filter cleaning unit which
can be used to shake the dust off the
folding filter cassettes.
The folding filter cassettes are cleaned
alternately so that continuous working
can be guaranteed.
iPulse
- Continuous monitoring of the filter
filling level through differential pressure
measurement, for an absolutely
precise on-demand filter cleaning
during the operation
- Thereby constant high air flow cleaning
guaranteed during the operation, even
for critical types of dust
6
6. Standard Accessories
.
Suction hose (φ35 mm / 3.2 m)
Polyester filter cassettes (M class):
Attached to device
Fleece filter bag
Crevice nozzle
Universal nozzle
Handle adapter
Plastic suction tubes
Tube support: Attached to device
7. Specifications
.
Voltage
Frequency
Rated power
1
Air flow*
2
Air flow*
1
Negative pressure*
2
Negative pressure*
L W H
Weight without mains
3
cable*
Filter surface
*1 at the hose, *2 at the fan
*3 Weight: According to EPTA-Procedure 01/2014
Connection line on dust extractors with plug socket:
H05RR-F 3X 1.5
Note: Due to HiKOKI's continuing program of
research and development, the specifications
herein are subject to change without prior notice.
8. Commissioning
Before plugging in, check that the rated
mains voltage and mains frequency, as
stated on the type plate match your power
supply.
8.1
Inserting a Fleece Filter Bag
We recommend using fleece filter bags for:
- Applications, where small amounts of fine dust are
created (e.g. spot-grinding and grinding of paint
and lacquer coatings, extraction of drilling
applications with small diameters < 10 mm of
short duration, etc.).
1
2
1
1
1
1
2
1
RP350YBL
V ~
220–240
Hz
50/60
W
1400
m³/h
151
m³/h
263
hPa
235
hPa
270
mm
550 400 550
kg
15.2
2
cm
8400
Publicidad
